Hi Team,
A customer is requesting for the theta_JC (both top and bottom) of ADC101S021CIMF/NOPB as it is not available from the datasheet.
Regards,
Danilo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
A customer is requesting for the theta_JC (both top and bottom) of ADC101S021CIMF/NOPB as it is not available from the datasheet.
Regards,
Danilo
Hi Danilo,
This information is not readily available. We'll see if the thermal modeling team can accommodate the request, so please give us a few days to get back to you.
Hi Danilo,
A thermal model request was submitted. The process can take up to two weeks, so I'll give more detail once its available.
Hi Tom,
Thank you for your support. We will wait for the data and will send follow up emails after 1-2 weeks.
Regards,
Danilo
Hi Tom,
Thank you very much for these information which you have provided much earlier than scheduled.
Thank you for your support.
Regards,
Danilo
Hi Tom,
We really appreciate the fast turn around time. However, can we also request for the bottom Theta JC of the device?
Regards,
Danilo
Hi Danilo,
Theta-JC (Bottom) is only applicable to packages with exposed pads, which the DBV (SOT) package does not have. Can you clarify why you are expecting this value or if you have a different definition?