TSW14J56EVM: Protocol between the TSW14J56 board and the HSDC Pro GUI

Lee JungMin

Part Number: TSW14J56EVM

Hello

The TSW14J56 board and HSDC Pro GUI program will be used to check the ADS52J90 JESD204B output signal.

We want to check the characteristics of the output signal by making our own program, not the HSDC Pro GUI program.

To do this, we need to know the protocol between the TSW14J56 board and the HSDC Pro GUI program, and we want to know if we can get this information.

Thank you.

over 5 years ago

0 jim s over 5 years ago

TI__Guru* 91947 points

Lee,

See attached documents for information regarding the software and firmware. You can also find information in the HSDC Pro Automation DLL directory at "C:\Program files(86)\Texas Instruments\High Speed Data Converter Pro" directory after the GUI has been installed on your PC. This is about all we can provide for this request.

Regards,

Jim

1680.TSW14J56 RevD MC firmware design document.doc 8741.TSW14J56revD ADC INI File Guide (2).docx TSW14J56 board description .docx

0 Lee JungMin over 5 years ago in reply to jim s

Prodigy 40 points

Thank you sir

Data converters

Data converters forum

TSW14J56EVM: Protocol between the TSW14J56 board and the HSDC Pro GUI