ADS5474EVM: Compatibility Inquiry

Cedrick

Part Number: ADS5474EVM

Hi,

Good day. I hope everything is fine.

Our customer want to use the ADS5474EVM however they want to know if this can be interfaced with Lattice Crosslink FPGA. As they have mentioned, the Crosslink has raspberry PI, PMOD, and FMC connectors. I would appreciate if you could confirm if this would work. Also, if they need an adapter, which would it be?

I hope to hear from you soon. Thank you.

Regards,

Cedrick

over 5 years ago

0 jim s over 5 years ago

TI__Guru* 91947 points

Cedrick,

The customer will have to verify this interface as I know nothing about the Crosslink FPGA. Attached is the User's Guide for the ADS5474EVM which contains the board schematic. TI also has two adapters (both attached) they may used depending on what type of connecter the Crosslink board has.

Regards,

Jim

slau194a.pdf 1220.SCH_HSMC_ADC_BRIDGE_REV_C.pdf 4478.FMC-ADC_ADAPTER-SCH_D.pdf

0 jim s over 5 years ago

TI__Guru* 91947 points

Cedrick,

Regards,

Jim

0724.slau194a.pdf 5148.SCH_HSMC_ADC_BRIDGE_REV_C.pdf 7674.FMC-ADC_ADAPTER-SCH_D.pdf

Data converters

Data converters forum

ADS5474EVM: Compatibility Inquiry