Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 647 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

High Speed ADC to FMC (Xilinx) Header Adapter Card

TONG DUAN
Prodigy 40 points
Other Parts Discussed in Thread: FMC-ADC-ADAPTER, DAC38J84

Hi,

I am Tong Duan, from the University of Alberta. We already have a FMC-ADC-ADAPTER bought from your company to connect the FMC interfaces of our Xilinx VCU118 board with the Oscilloscope. Now we have a new Xilinx VCU128 board, but there is no FMC interface on the board and only FMC+ connectors are featured. So, we want to ask, if you have a ADC-to-FMC+ DAC board to connect  the FMC+ connectors with the oscilloscope? The picture of the Xilinx VCU128 board is attached, please take a look.

If you have the related product, could you please tell me? Looking forward to your reply, thank you!

Sincerely,

Tong Duan

  • 0
    TI__Mastermind 18095 points

    The smaller FMC (regular) connector on a TI DAC EVM will fit inside the larger FMC+ on the Xilinx FPGA board.  No adapter is needed.  The JESD204B DAC product like the DAC38J84 EVM have an FMC (regular) connector.

    I am not exactly sure what your oscilloscope is, but if it uses a regular FMC connector like our DACs then it will fit inside the FMC+ connector without an adapter.

    --RJH