DAC60096EVM: Design file

Mahmood sa

Part Number: DAC60096EVM
Other Parts Discussed in Thread: TPS63700

Hi,

We have a dac60096evm board, based on how it is working and also datasheet from your website we tried to design our board and we print the PCB as well. But unfortunately, it was not a successful project. I want to know may I have your Altium designer file for this board. we want to use it as a reference for our new board design. for sure we don't have any problem with citation your design because we are a research group in university.

Thanks

over 6 years ago

0 Paul_Frost over 6 years ago

TI__Guru 57453 points

Here are the files.

PA002A (9-17-2015 12-53-12 PM).zip

https://e2e.ti.com/support/data-converters/f/73/t/911102

0 Mahmood sa over 6 years ago in reply to Paul_Frost

Prodigy 110 points

Hi Paul,

I really appreciate for the file. it is a very good reference for us. May I ask another question. My input voltage to our board is 24v and then we used a linear voltage regulator to convert it to the +12v (for AVCC) do you have any suggestions for generating -12v (AVSS)? any type of voltage regulator or IC?

Thanks

0 Paul_Frost over 6 years ago in reply to Mahmood sa

TI__Guru 57453 points

It ultimately depends on the current load that you expect on the output. It is not difficult to get a regulator that can provide the correct voltage, but rather the current is usually the limiting factor.

Take a look at the TPS63700.

Thanks,

Paul

0 Mahmood sa over 6 years ago in reply to Paul_Frost

Prodigy 110 points

Thank Paul

Data converters

Data converters forum

DAC60096EVM: Design file