• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 283 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1293: Some simple application question for ADS1293

George Liu1
Intellectual 1570 points
Part Number: ADS1293

Hi Sir,

Here are some question from customer, would need your support to answer that.

1. Limit electric area (on chest), any comments?
2. Is there any recommended material for back cover?
3. What’s the prefer contact way between ECG and PCB?

Thanks,

George

  • 0
    TI__Mastermind 49926 points

    Hello George,

    We are not the experts on the back cover material or the type / placement of electrodes on the chest.

    The interface to the ADS1293EVM is through a DB9 connector. The electrodes are connected to the PCB through this DB9 connector.

    The ADS123EVM can be directly interfaced to the ECG simulator (Eg. Fluke medSim 300B)