TLA2518: power up in correct way

Yawi Miki

Prodigy 140 points

Part Number: TLA2518

Hi ,

I am using this chip as ADC, I have connected both AVDD and DVDD to 3.3V. Is this a correct way to power up this chip?

Thanks

over 5 years ago

0 Collin Wells over 5 years ago

TI__Guru 64125 points

Hello,

As shown in Table 6.3 Recommended Operating Conditions, the typical supply voltage for AVDD and DVDD is +3.3V. The full ranges for the supplies are listed in the table.

Data converters

Data converters forum

TLA2518: power up in correct way