ADC12DL3200: High speed LVDS interface

Wesley Chen1

Prodigy 85 points

Part Number: ADC12DL3200
Other Parts Discussed in Thread: TSW14DL3200EVM

How can I interface this high speed adc to XIlinx FPGA?

over 5 years ago

0 RJ Hopper over 5 years ago

TI__Mastermind 18095 points

You can use the TI capture card solution, TSW14DL3200: https://www.ti.com/tool/TSW14DL3200EVM. Otherwise, you can use your own FPGA development kit. The connector is a standard FMC+ connector that will interface to standard Xilinx FPGA development kits.

--RJH

0 Wesley Chen1 over 5 years ago in reply to RJ Hopper

Prodigy 85 points

Dear sir,

Thank for your suggestion. Since the data rate of ADC12DL3200 is 38.4 Gbps for each channel, but the Xilinx FPGA could not handle this data rate to do DDC. Do you have recommendation for Xilinx FPGA part number? Thank in advance.

Wesley

0 RJ Hopper over 5 years ago in reply to Wesley Chen1

TI__Mastermind 18095 points

The ADC12DL3200 supports up to 48 data pairs at 1.6 Gbps. I am not familiar with all the Xilinx FPGA options, but the FPGA used on the TSW14DL3200EVM is known to be sufficient.

--RJH

0 Wesley Chen1 over 5 years ago in reply to RJ Hopper

Prodigy 85 points

Dear sir,

Thank.

Wesley

Data converters

Data converters forum

ADC12DL3200: High speed LVDS interface