ADS1298: Can i use the ADS1298ECGFE-PDK software on a raspberry pi with SPI to read and show the data from my EMG sensor??

JOAO VITOR DE PAIVA MARCOTTI

Part Number: ADS1298

I am developing an EMG sensor using the ADS1298 as the ADC.

I am having trouble to code the ADS1298.

I would like to know:

Can I use the ADS1298ECGFE-PDK software on a raspberry pi with SPI comunication to read and show the data from my EMG sensor??

over 4 years ago

0 Praveen Aroul over 4 years ago

TI__Mastermind 49786 points

Hello Joao,

The ADS1298ECGFE-PDK software has been primarily designed and tested on Windows platform.

We have never tested the software on raspberry pi platforms and hence will not be able to support the software on Raspberry pi.

0 JOAO VITOR DE PAIVA MARCOTTI over 4 years ago in reply to Praveen Aroul

Prodigy 60 points

And if I use the ADS1298ECGFE-PDK software on a raspberry pi with windows, can I control the ADS1298 with SPI comunication??

0 TCT over 4 years ago in reply to JOAO VITOR DE PAIVA MARCOTTI

TI__Genius 11550 points

Hi Joao,

The ADS1298ECGFE-PDK GUI software is written specifically to interface to the MMB0 modular EVM motherboard and the ADS1x98ECG FE evaluation board. You will need to create your own software if you are using the Raspberry pi as the interface to the ADS1x98ECG FE evaluation board.

Thanks.

-TC

0 JOAO VITOR DE PAIVA MARCOTTI over 4 years ago in reply to TCT

Prodigy 60 points

Hi TCT,

I am not using the Raspberry pi as the interface to the ADS1x98ECG FE evaluation board.

I am using it to control the ADS1298 in the EMG sensor that I am developing.

0 TCT over 4 years ago in reply to JOAO VITOR DE PAIVA MARCOTTI

TI__Genius 11550 points

Hi Joao,

Your Raspberry pi is equivalent to the MMB0 motherboard for the PDK which can be used to interface to the ADS1x98ECG FE evaluation board or your own development board. The software GUI will only work with the MMB0 and not with your Raspberry pi board.

Thanks.

-TC

0 JOAO VITOR DE PAIVA MARCOTTI over 4 years ago in reply to TCT

Prodigy 60 points

If I use the MMB0 motherboard, the ADS1x98ECG FE PDK can interface with my own development board??

0 TCT over 4 years ago in reply to JOAO VITOR DE PAIVA MARCOTTI

TI__Genius 11550 points

Hi Joao,

It is possible to use the MMB0 motherboard to interface to you own development board using the signal indicated in section 5.6 of the user's guide.

Thanks.

-TC

0 JOAO VITOR DE PAIVA MARCOTTI over 4 years ago in reply to TCT

Prodigy 60 points

In the MMB0 user's guide??

0 TCT over 4 years ago in reply to JOAO VITOR DE PAIVA MARCOTTI

TI__Genius 11550 points

Please refer to ADS1x98ECG FE PDK user's guide. Thanks.

Data converters

Data converters forum

ADS1298: Can i use the ADS1298ECGFE-PDK software on a raspberry pi with SPI to read and show the data from my EMG sensor??