Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 218 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE4404EVM: Want to Know Witch one is true

user6235457
Prodigy 30 points
Part Number: AFE4404EVM

I have buy the AFE4404EVM Broad, and create the platform.

But the hardware i have try the use the oscilloscope measure the signal.

But the TX1~3、INM and INP I can not check the signal is true or false, so the compane can give me some information?

thanks,

best regard,

Johnny

  • 0
    TI__Mastermind 49786 points

    Hello Johnny,

    I am sorry, I am not able to understand your question clearly.

    Would you like to probe the TXn, INP and INN signals on the board?

    If that is the case, you can check the TXn signals on the J4 connector.

    For the INP and INN signal, you can either use the L1 or J4 connector.

    Please refer to the AFE4404EVM schematics in section 11.3 of the user guide document.