DDC114: Datasheet error

May

Part Number: DDC114

Hi Team,

Good day.

We received query from customer and want to confirm if the minimum non-continuous mode integration time is 50us for this device. Because the integration time (non-continuous) found in electrical characteristics and the integration time (non-continuous) in the table 8 page 18 of the datasheet is not equal. Kindly confirm if there is an error in the said datasheet.

www.ti.com/.../ddc114.pdf

Thank you and looking forward for your kind response.

Regards,
Maynard

over 5 years ago

0 TCT over 5 years ago

TI__Genius 11550 points

Hi Maynard,

I'll check with the design and get back to you.

Thanks.

-TC

0 May over 5 years ago in reply to TCT

TI__Genius 9880 points

Hi TC,

Any update regarding this query?

Thank you and looking forward for your kind response.

Regards,

Maynard

0 TCT over 5 years ago in reply to May

TI__Genius 11550 points

Hi Maynard,

Thanks for the patience. The minimum non-continuous mode integration time in the electrical characteristics is correct (50us). Table 8 on page 18 is showing the incorrect values.

Thanks

-TC

Data converters

Data converters forum

DDC114: Datasheet error