AMC1210MB-EVM: Related AMC1210EVM software problem

ZZZT

Part Number: AMC1210MB-EVM
Other Parts Discussed in Thread: AMC1306EVM, , AMC1210

I would like to use AMC1210EVM+AMC1306EVM to test , and I find in user guide the software of AMC1210EVM can not be use in WIN10.

Is there any way to run AMC1210EVM software and drivers on WIN10?

I want to use AMC1306EVM to link with AMC1210EVM, what do I need to do?

over 4 years ago

0 Tom Hendrick over 4 years ago

TI__Guru**** 173686 points

Hi there,

The AMC1210MB-EVM installer was originally developed on WinXP. It was modified a couple years ago to accommodate Win7. To be honest, I'm not sure that it will work with Win10. Do you have access to an older PC to do your evaluation?

0 ZZZT over 4 years ago in reply to Tom Hendrick

Intellectual 340 points

Actually, my computer only supports WIN10, I want to know if there is any way to realize the driver.

Now, An error message in the figure,It seems that there is no driver,Do you have any suggestions？

0 Tom Hendrick over 4 years ago in reply to ZZZT

TI__Guru**** 173686 points

If you have administrative rights on your PC, you can try to force unsigned drivers option and see if that works.

0 Alexander Smith over 4 years ago in reply to Tom Hendrick

TI__Guru 50301 points

Hi,

The following steps can be followed to force unsigned drivers on W10:

0 ZZZT over 4 years ago in reply to Alexander Smith

Intellectual 340 points

Hi,

Thank you for your reply, I will try this method.

But I want to know if the problem in my reply is due to WIN10？I see whether I need to download other software on the AMC1210EVM user guide？I only downloaded the AMC1210 software on TI's official website,Can you give me some suggestions?

0 Tom Hendrick over 4 years ago in reply to ZZZT

TI__Guru**** 173686 points

The installer itself should take care of these items, you should not need to download any additional software.

0 ZZZT over 4 years ago in reply to Alexander Smith

Intellectual 340 points

Hi Alex,

I tried your method to force unsigned drivers on W10, but still not working.Do you have any advice？

Regards

0 Alexander Smith over 4 years ago in reply to ZZZT

TI__Guru 50301 points

Hi,

Occasionally, the unsigned drivers work-around does not always work. User's sometimes have issues with their computer's protection software or did not use administrative rights. Unfortunately I do not have any other suggestions to offer.

Data converters

Data converters forum

AMC1210MB-EVM: Related AMC1210EVM software problem