• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 47 subscribers
  • Views 580 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8664: 12bit ADC design

Anita Joseph
Prodigy 20 points

Part Number: ADS8664

The output from one position sensor and three force sensors are given to this 12bit ADC. Can anyone suggest a better design?

  • 0
    TI__Guru 50495 points

    Hi Anita,

    Can you please provide more information? for instance, 

    1. Your signal amplitude? +/-5V single-ended or others?
    2. Your signal frequency?
    3.  is the 1Mohm input impedance of ADC good enough for your sensors? sampling rate per channel?
    4. Any other requirements? 

    Regards,

    Dale

  • 0 in reply to Dale Li
    TI__Guru 50495 points

    Hi Anita,

    I'm going to close this thread since I have not got a response for a couple of weeks. You can open another thread on the forum if you have any further question about this ADC. Thanks.

    Regards,

    Dale