ADS1018: Transistor Count

Taisiya Shlyahova

Part Number: ADS1018

Hello,

for my calculations of reliability i need a count range (ie 1-k, 3-5k, >5k, etc) of SN74LVC2G06DCKR, SN74LVC2G14DCKR and ADS1018IRUG for my reliability calculation.

Please, if it probably, send me this information.

Best Regards,
Taisiya

over 5 years ago

0 Joachim Wuerker over 5 years ago

TI__Mastermind 23975 points

Hi Taisiya,

for the ADS1018IRUG please refer to the following document which you can find on the ADS1018-Q1 product folder:

ADS1018-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA

Using SN 29500 and table 2 in the above mentioned document you can infer the transistor count range.
The data in table 2 is valid for ADS1018IRUG as well.

For information on the logic gates you may have to post your question in the logic gate forum of the e2e forum or reach out to your local TI representative.

Regards,
Joachim

Data converters

Data converters forum

ADS1018: Transistor Count