• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DDC264EVM: Photodiode Connection

Furkan Fehmi Sefiloglu
Expert 3118 points
Part Number: DDC264EVM
Other Parts Discussed in Thread: DDC264

Hi Team, 

This is customer request can you please advise:

"

We want to perform a photodiode test from the inputs of the DDC264 development card, but the connector where the card's inputs are located is not suitable for directly connecting the diode. Is there a ready-made intermediate card for this?

"

Thanks in advance

Best Regards

Furkan Sefiloglu

  • 0
    TI__Genius 11550 points

    Hi Furkan,

    Unfortunately, we do not have a ready-made intermediate card to connect the EVM to the photodiode directly. 

    Is it possible for them to depopulate some of the resistors on the AIB (Analog Interface  Board) and solder the PD to this board for their testing? 

    Thanks.

    -TC