• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 220 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ads1230 sample code

ADS1230: ADS1230REF design files and code

Carlo
Expert 7715 points
Part Number: ADS1230

Hi team,

The ftp link on this post is not accessible anymore. Can you share the design files and reference code for ADS1230REF? Thank you.


Regards,
Carlo

  • 0
    TI__Guru** 113765 points

    Hi Carlo,

    I just answered a similar question on E2E:

    https://e2e.ti.com/support/data-converters/f/73/p/955389/3530518#3530518

    In short, we can no longer provide the software code in it's current form (15+ years old now).  To do so would require an extensive effort in rewriting the application for approval for release by the software team.  We have developed new hardware and hope to release a new EVM complete with example code next quarter.

    As I said in the other post, the code in its present form would not be all that useful.  If there is some specific information that would be helpful to the customer I would be glad to try and help. 

    As far as design files, what specifically is the customer looking for?  The original design was done in Protel 99SE and the files provided would have been gerbers only.  If the gerbers would be helpful I can see what I can do.  Really this is not all that complicated of a part to use and only has a single analog input. 

    Best regards,

    Bob B