• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 392 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC3660: Synchronizing multiple ADCs

Pieter Ibelings
Prodigy 90 points
Part Number: ADC3660

Hi,

I have an application where I use 16 of the ADC3660 connected to an FPGA in 32 decimation/20bit complex mode.
All of the ADCs have their NCOs at the same frequency and are configured identically. I would like to synchronize them so that the phases and samples are aligned.

1. What is the recommended synchronization procedure? Should the sync pin be driven high for a short period after all of the ADC registers are programmed or driven at regular intervals?

Thanks,

Pieter