ADS1281EVM-PDK: Driver software settings

Gust Zhang

Part Number: ADS1281EVM-PDK
Other Parts Discussed in Thread: ADCPRO

Hi Team,

I want to set up ADS1281EVM, when I install the ADCPro and I find my computer can't install the driver, so that I can't set up the EVM. Could you help me or provide me the TI driver configuration.

over 5 years ago

0 Christopher Hall over 5 years ago

TI__Mastermind 44770 points

Hi Gust,

Figure 9 might be from an older version of the Windows OS. If you've downloaded and installed ADCPro and ADS1281EVM-PDK-SW, you should have gotten the driver. However, if you are still having driver issues you can find the Driver installer at C:\Program Files (x86)\ADCPro\drivers\ and select between the 32-bit (mmb0_driver_install_x86-v2.0.0.0.msi) or 64-bit (mmb0_driver_install_x64-v2.0.0.0.msi) OS installer.

Try running the driver install again and let me know if that resolves the issue.

0 Holly Gu over 5 years ago in reply to Christopher Hall

TI__Intellectual 2750 points

Hi Team,

I met similar issue with Gust, also similar with below link.

1. Use on-board power, GUI/EVM version are as below,

2. Re-install mmb0_driver_install_x64-v2.0.0.0.msi, re-power, re-plug in, no helpful.

3. Changed to several computers with Win10 Pro, no helpful.

Does +/- 10V the only way? Any other suggestions?

0 Christopher Hall over 5 years ago in reply to Holly Gu

TI__Mastermind 44770 points

Hi Holly,

The ADS1281EVM-PDK does require the +/- 10V bench supply (in addition to the 5V supply) to be connected and provided to the MMB0 in order for the PC/software to connect. Therefore, do make sure all supplies are provided. It used to be that we would provide a wall outlet/power supply in the kit to generate the 5V supply to the MMB0, but unfortunately there is no one wall-connected power supply which can support all countries AC-distribution networks as well as satisfy the required efficiency and materials regulations.

Technically, ADCPro is not fully-compatible and supported on Windows 10. We made some updates a few years ago to make it more compatible with Windows 10, but we've still seen issues with users using Windows 10. If you have a Windows 7 machine you might try it to see if the EVM works on it. Otherwise, we have seen users get the software to work on Windows 10 with a little bit of clever manipulation. See the following E2E threads for details:

0 Holly Gu over 5 years ago in reply to Christopher Hall

TI__Intellectual 2750 points

Hi Chris,

By adding +/- 10V power on board, the issue can be solved.

0 Christopher Hall over 5 years ago in reply to Holly Gu

TI__Mastermind 44770 points

Hi Holly,

Great, I'm glad that resolved the issue! Let us know if you have any additional questions.

Data converters

Data converters forum

ADS1281EVM-PDK: Driver software settings