AFE4400SPO2EVM: Automatic gain control related inquiry

Jonathan Geronga

Part Number: AFE4400SPO2EVM
Other Parts Discussed in Thread: AFE4404, AFE4403EVM

Hi team,

Our customer would like to use AFE4400SPO2EVM to collect SpO2 data from the chin and they have a question below:
Does the EVM do automatic gain control, if yes, is that the "enable calibration routine"? How does it work?

Please let me know if you have any questions with our customer.

Thanks,

Jonathan

over 3 years ago

0 Jonathan Geronga over 3 years ago

TI__Expert 7930 points

Hi Team,

I would like to ask for an update in this thread?

Thanks,

Jonathan

0 Praveen Aroul over 3 years ago in reply to Jonathan Geronga

TI__Mastermind 49746 points

Hello Jonathan,

The AFE4400SPO2EVM does not have automatic gain control.

The GUI also does not have the 'Enable Calibration Routine'.

This feature is only supported in AFE4404 GUI.

0 Jonathan Geronga over 3 years ago in reply to Praveen Aroul

TI__Expert 7930 points

Hi Praveen,

The customer shared the image and would like to ask about what does the "caibration routine" in the GUI.
The customer is using AFE4403EVM as I confirmed because of the shared image.

Please let me know your comment.

Regards,

Jonathan

0 Praveen Aroul over 3 years ago in reply to Jonathan Geronga

TI__Mastermind 49746 points

Hi Jonathan,

The calibration routine finds the optimal AFE setting like the LED current, TIA gain, offset DAC setting for the user.

The calibration routine is only applied to 1 LED (Green LED).

Follow the instructions in the pop-up when the check box is enabled.

Data converters

Data converters forum

AFE4400SPO2EVM: Automatic gain control related inquiry