• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 532 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE4300: [AFE4300] Calibration process

Gauthier de R
Prodigy 10 points

Part Number: AFE4300

Hello E2E forum !

I am trying to integrate TI AFE4300 chip on a smart scale board.

I am having troubles calibrating and interpreting the measures. Is there any way to have a calibration process for both impedance measurement and load cells measurement ?

I see that this part info is under NDA, and I have a NDA signed with TI. Where can I ask for those information ?

Thanks and have a good day !

Gauthier

  • 0
    TI__Guru 50036 points

    Hello Gauthier,

    We would like to take this discussion offline since the device AFE4300 is shared under selective disclosure.

    Can you send your questions to biosensing_afe-support@list.ti.com along with a reference to this E2E post?