• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 220 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1292R: How can I test the ECG performance?

hsincheng lai
Prodigy 20 points
Part Number: ADS1292R

Hi

I design a ECG circuit with ADS1292r, but I cannot find any document to describe how to check the performance.

In the medical device test standard, CMRR/dynamic range/Reproducibility......should be checked.

The block diagram of ADS1292r shows the waveform after ADC1/ADC2 cannot be measured.

Does TI have another tool to do those measurement?

Thanks

  • 0
    TI__Genius 11550 points

    Hi Hsin Cheng,

    Welcome to the E2E forum !!

    We recommend using the Patient Monitor Simulator such as the Fluke medSim 300B or some newer model from Fluke (see link below for a more comprehensive product line from Fluke) to check the device performance and functionality. The IEC standards will apply to the system-level design and not specifically for the ADS1292R by itself. We do not have any documentation for the medical certification.

    https://www.flukebiomedical.com/products/biomedical-test-equipment/patient-monitor-simulators

    hsincheng lai said:

    The block diagram of ADS1292r shows the waveform after ADC1/ADC2 cannot be measured.

    Does TI have another tool to do those measurement?

    Can you please help clarify what you mean by not able to measure the waveform after ADC1 and ADC2? 

    Thanks.

    -TC