• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BP-DAC11001EVM: Conflicting Pin assignment between EVM and the datasheet

Art Mecina
Genius 16655 points
Part Number: BP-DAC11001EVM

Hello Guys,

Good day.

In the datasheet it states Pin 10 as ROFS and Pin 11 as RCM. On the other hand, in its evaluation board BP-DAC11001EVM schematic (User Guide), it labeled Pin 10 as RCM and Pin 11 as ROFS. Which one of the document is correct?

Thanks in advance!

Art

  • 0
    TI__Guru 53773 points

    Hi Art,

    Good catch with the EVM.  The datasheet is correct.  The schematic labels are incorrect, though the symbols on the schematic are correct (in that pin number are correct, but the text label is wrong).

    I will notify our team to make sure it is corrected on the next revision of the user guide.

    Thanks!

    Paul