ADC128S102QML-SP: Metal (CD) or Glass sealed (GD) package

Guillaume VanDePutte

Dear Madam, dear Sir,
I am interested in procuring your ADC128S102WRQV in accordance with the associated SMD#5962R0722701VFA.
The SMD mentions two possibilities for case outline F: GDFP2-F16 or CDFP3-F16.
Could you please clarify which of the two it is?
I thank you very much in advance.

over 4 years ago

0 Cynthia over 4 years ago

TI__Mastermind 25020 points

Hello,

The case outline for the ADC128S102WRQV will be the long lead package.

Attached is the mechanical drawing, NAD0016A.

NAD0016A.pdf

0 Guillaume VanDePutte over 4 years ago in reply to Cynthia

Prodigy 20 points

Dear Cynthia,

I thank you for your prompt reply. However, both GDFP2-F16 and CDFP3-F16 can be considered "long leads" (=no pre-bent short leads but long leads to be bent by the buyer).

The GDFP2-F16 is a "middle-brazed" glass seal package whereas the CDFP3-F16 is a bottom-brazed package.

With respect to the mechanical drawing you sent, it seems to be: "middle-brazed" glass seal package.

Could you please confirm that the part number 5962R0722701VFA is made according to NAD0016A (=GDFP2-F16 iaw MIL-STD-1835)?

I thank you in advance.

0 Cynthia over 4 years ago in reply to Guillaume VanDePutte

TI__Mastermind 25020 points

Hello Apologies for the late response,

it is my understanding that the designation for GDFP2-F16 and CDFP3-F16 are interchangeable.

Regards

Cynthia

Data converters

Data converters forum

ADC128S102QML-SP: Metal (CD) or Glass sealed (GD) package