Fish Finder Sonar

Satish Kumar

Prodigy 10 points

Other Parts Discussed in Thread: TX7332, TX7316

Need design for low cost fish finder , Dual Beam and CHIRP type. Image displayed on 5 inch or 7 inch ARM based board.

What are the Parameters , dimensions for sonar transducer, low cost Signal processing chip type for Dual Beam , Chirp.

Regards

over 4 years ago

0 Shabbir Amjhera Wala over 4 years ago

TI__Expert 4711 points

Hi,

This question is very open ended question. Looks like you are looking for both transmitter and receiver. You can refer to below reference design for more details about one of receiver suggestion. For transmitter you can look for TX7316 or TX7332 kind of device.

https://www.ti.com/lit/ug/tidu702/tidu702.pdf?ts=1619341307846&ref_url=https%253A%252F%252Fwww.google.com%252F

Data converters

Data converters forum

Fish Finder Sonar