ADS8588S: Layout review

NIKHITHA ANTONY

Part Number: ADS8588S

Hi,

Kindly review the board file of ADC designed using IC ADS8588SIPMR .

Schematics and Gerber file is attached. Kindly go through it and let me know your comments.

Regards

Nikhitha antony

0 NIKHITHA ANTONY over 3 years ago

0 Dale Li over 3 years ago in reply to NIKHITHA ANTONY

Hi NIKHITHA,

Your schematic looks good, I have few suggestions:

A solid ground plane is strongly recommended instead of separate ground for analog and digital signals.
Since you use a board connector between the ADC and controller, small series resistors (e.g. 49.9ohm can be used for all digital signals to the connector.

Also, I can only review a layout in Altium.

Thanks&regards,

Dale

Data converters forum