• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 52 subscribers
  • Views 581 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

GUI composer missing from View menu

Garfield Powe
Prodigy 20 points
Other Parts Discussed in Thread: MSP430G2211

I have been  "experimenting" with CCS v6.1.1.00022  connecting to a Launchpad MS-EXP430G2, programming an MSP430G2211 controller using Windows.

I recently thought I would install the GUI Composer to shed some light on what is going on inside the controller but have run into some trouble which I hope someone can help me with.

I installed GUI Composer via the CCS App Center by ticking the box and clicking install.  All seemed to go well and I was asked to restart CCS which I duly did.

However, I do not see GUI Compser in the View menu .  

I have searched high and low but cannot find out what I am doing wrong.  Any advice appreciated.

  • 0
    TI__Guru**** 173310 points

    Garfield Powe said:
    I installed GUI Composer via the CCS App Center by ticking the box and clicking install.  All seemed to go well and I was asked to restart CCS which I duly did.

    That should be all that is required to make GUI Composer available from the View menu.

    Are you, by any chance, using the "CCS Simple" perspective ? (the perspectives will be displayed in the top right corner of the CCS workbench).

    I have noticed that GUI Composer is not listed in the View menu in the CCS Simple perspective. If you are using CCS Simple, can you switch to CCS Edit and see if it appears?

  • 0 in reply to AartiG
    Prodigy 20 points
    Thank you so much. I thought I was beginning to go mad !

    Perfect.