CCS: setup the demo sample code

user5801385

Prodigy 50 points

Tool/software: Code Composer Studio

after setup the CCS and SDK,I restart the CCS to exit resouce explorer to setup demo sample code ,but the page is this:

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 450031 points

Hello,
We are doing some maintenance on our cloud servers. It should be resolved in a few hours. Sorry for the inconvenience.

ki

0 Ki over 7 years ago in reply to Ki

TI__Guru**** 450031 points

Resource Explorer should be back up now. Note that you may have to manually press the "connect" button (upper right corner of Resource Explorer) to establish connection again.

Thanks
ki

0 user5801385 over 7 years ago in reply to Ki

Prodigy 50 points

thank for your answer!However,it doesn't solve my problem. when i press the connection button,this dialog shows:

then i exit the address provided and according to the steps ,but this shows:

0 Ki over 7 years ago in reply to user5801385

TI__Guru**** 450031 points

Please see the below thread:
e2e.ti.com/.../726513

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

CCS: setup the demo sample code