DLPNIRNANOEVM: BT connection

FRANK1

Expert 8535 points

Part Number: DLPNIRNANOEVM

Hi team,

A customer has ordered DLPNIRNANOEVM.

He wanna open bluetooth automatically when powered up, not press the Wake button to wake up the bluetooth.

How to configure and operate EVM board?

Thank you for your clarification.

Regards,

over 4 years ago

+1 Cody Smith over 4 years ago

TI__Expert 3360 points

Hi Frank,

The user's guide for the DLP NIRscan Nano can be found here: https://www.ti.com/tool/DLPNIRNANOEVM#tech-docs. Section 2.5.2 discusses getting started with the Bluetooth connection and section 5.4 discusses the use of the Bluetooth Client App.

Thank you,

Chris

0 FRANK1 over 4 years ago in reply to Cody Smith

TI__Expert 8535 points

Hi Chirs,

Can Section 5.4 achieve open bluetooth automatically when powered up?

customer does not wanna press button every time。

Thanks.

+1 Arthur Brown over 4 years ago in reply to FRANK1

TI__Mastermind 20575 points

Frank,

Automatic Bluetooth connection wasn't an intended feature in this EVM. the button that enables Bluetooth is effectively pulling a pin on the EVMs MCU low. meaning that software modification to the MCU would be necessary for the feature you request (assuming that it is possible at all). Unfortunately this is not something that we are able to support.

I apologize for this inconvenience.

Thank you and best regards,

Arthur

DLP®︎ products

DLP products forum

DLPNIRNANOEVM: BT connection