DLPDLCR3310EVM: Replacing the green and blue leds

Davide Marin

Part Number: DLPDLCR3310EVM

We would like to replace the blue and green leds with another red one.

Which part number and brand is the red Led onboard?

Are there any info about led replacement on this EVM?

Thanks

0 Vivek Thakur over 3 years ago

Hello Davide,

Welcome to DLP forum and thank you for your interest in DLP technology.

I will inquire about the LED used in the optical engine for this EVM and get back to you.

Meanwhile , Could you please share details about your application and requirement?

regards,

Vivek

0 Vivek Thakur over 3 years ago in reply to Vivek Thakur

Hello Davide,

The LEDs used in the optical engine are

Osram KPCSLPM1, LE A Q8WP and LE B Q8WP.

regards,

Vivek

0 Davide Marin over 3 years ago in reply to Vivek Thakur

Thanks. Do you have also the design files for the Leds Pcbs? They are similar to this one.

On the page https://www.ti.com/tool/TIDA-080000#tech-docs I was only able to find schematics for the main pcb.

0 Austin Snyder over 3 years ago in reply to Davide Marin

Hello Davide,

We do not have the design for the LED's in the 3310EVM. These are manufactured by OSRAM. It may be possible to reach out to OSRAM for these designs.

Kindly,

Austin

DLP products forum