DLP4710: Projecting patterns help

Noah Ngan

Part Number: DLP4710
Other Parts Discussed in Thread: DLPC3479

Hi TI forum,

I would like to ask regarding the DLP 4710 light projector. For our project, we would like project specific patterns instead of an image/video, and we were wondering if there was any way to set a timer for the projector to shine each pattern (like a slideshow)? We would like the pattern to not have a framerate.

If there is any software we should find out let me know!

Many thanks!

over 2 years ago

0 Austin Snyder over 2 years ago

TI__Genius 12785 points

Hello User,

Welcome to the E2E forum and thank you for your interest in DLP® technology!

Depending on what patterns you are intending, the DLPC3479 can likely meet your needs. The controller has the capability of storing and loading 1D patterns to be displayed. The rate at which these patterns are displayed can then be controlled using the Trigger In Mode.

For more details on Trigger In Mode, please see Section 7.3.2.2.2 of the DLPC3479 Datasheet and Sections 3.1 and 3.4 of the DLPC3479 Software Programmer's Guide.

Regards,

Austin

DLP®︎ products

DLP products forum

DLP4710: Projecting patterns help