DLP660TE: Can you Provide the Allegro Design file

kwangsam ahn

Prodigy 15 points

Part Number: DLP660TE

hello.

Our company has a DLPLCRDC4422EVM Board.

We downloaded the DLPLCRDC4422EVM Design Files and are using ORCAD 16.6 and an Allegro PCB.

We are going to create a Customer Board by modifying DLPCRDC4422EVM.DSN.

Error occurs while converting DLPCRDC4422EVM.DSN file to Allegro PCB.

Can you send me the final file(DLPLCRDC4422EVM.DSN, DLPDLCR660TEVM.DSN) and how to convert it to Allegro PCB?

Thank you....

over 2 years ago

0 Tristan Bottone over 2 years ago

TI__Intellectual 1800 points

Hello Kwangsam,

Thanks for reaching out and using the E2E Forums! An expert from our team will review the thread and get back to you shortly.

Best,

Tristan Bottone

0 Aaron Black over 2 years ago in reply to Tristan Bottone

TI__Genius 12035 points

Hello Kwangsam,

I've attached he .DSN files, but the design files are published to ti.com and are is available in the design files of the EVM product pages.

Both DLPCRDC4422EVM (dlpc123) as well as DLPDLCR660TEVM (dlpc124) are linked - these are current as of 8/8/2023.

Look under the 'Schematic' folder for the downloaded design files to find the .DSN and schematic documents.

Best,

Aaron

DLPDLCR660TEVM.DSN DLPCRDC4422EVM.DSN

0 Aaron Black over 2 years ago in reply to Aaron Black

TI__Genius 12035 points

Hello Kwangsam,

I realize I haven't answered your question concerning the conversion to Allegro PCB. This is not performed by Texas Instruments, I would recommend you consult either Cadence or a layout/board manufacturer.

Although we cannot assist with the conversion, we do offer the board files, again found in the previously included design files on ti.com. The board file you can reference is found under the 'Layout' folder.

Best,

Aaron

DLP®︎ products

DLP products forum

DLP660TE: Can you Provide the Allegro Design file