DLP5531-Q1: Document links broken for DLPC048 through DLPC052

Chris Harrises

Part Number: DLP5531-Q1
Other Parts Discussed in Thread: DLP5500,

Document DLPA015 ("DLP® Series-450 DMD and System Mounting Concepts") lists 5 document links in a Table 6, page 40. Could we get the correct links to those documents (DLPC048 through DLPC052)?

I noticed that file links for other CAD drawings referenced in other DLP documents are also broken (e.g., in DLPA034.PDF, Table 3, page 25).

All of those links have the format "">https://ti.com/litv/filename" where filename is the DLPxxxx filename.

over 1 year ago

0 Jason Thompson over 1 year ago

TI__Expert 3475 points

Thanks for identify the missing links. We are in the process of writing a new system mechanical app note that would replace both documents. In the short term, you can still find the equivalent files in the DLP5500 product folder under design documents. https://www.ti.com/product/DLP5500. Both of these app notes are 10+ years old. While the information has not really changed much and is relevant, we need to update for newer references and packages.

0 Chris Harrises over 1 year ago in reply to Jason Thompson

Prodigy 40 points

Thank you for the fast reply Jason. The documents are a little shy on some of the pin-guide mechanicals, but we should be able to figure it out using measurements from the DLP5531-Q1 EVM and datasheet, and using the older DLPA015 and DLPA067A mounting documents. Thanks, Chris.

0 Jason Thompson over 1 year ago in reply to Chris Harrises

TI__Expert 3475 points

Chris,

For the DLP5531-Q1, did you find this download file which has more updated system mounting information. https://www.ti.com/tool/download/DLPR072

This is located in the design and simulation for the DLP5531-Q1. Let me know if this is what you need, or if you have more questions.

DLP®︎ products

DLP products forum

DLP5531-Q1: Document links broken for DLPC048 through DLPC052