This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP160AP: Flickering on the DLP glasses while switching the projector in 3D

Other Parts Discussed in Thread: TPS65835

Hello All,

We have DLP 3D Projector (EH335, EH338) and we want to watch the SBS video in 3D for that we opened the SBS video on YouTube and set the 3D Format to SBS from auto, and switched 3D Mode to DLP Link from OFF by projector button. We observed some flicker on DLP Glass (Used TPS65835 IC), and it takes some time to get the glass stable, in most cases, the glasses get stable after 11-12 secs, and in a few cases they continue to flicker when we switch 3D Mode to ON (DLP-LINK) from OFF, so can anyone help on this flickering issue?

Thank You,

Yamini

  • Hello Yamini,

    Welcome to DLP Forum and thank you for your interest in DLP technology.

    This seems to be a right left frame sync issue with the 3D glasses. These glasses have a camera in the front which identifies left and right frame. Please clean the camera lens see if this helps.

    We don't have technical details on the end products manufactured by our customers. Please contact the manufacturer of the product for further assistance.

    regards,

    Vivek