DLPC7540EVM: The DLPC7540EVM Front-End Board's IT6807E EDID

cc jet

Part Number: DLPC7540EVM
Other Parts Discussed in Thread: DLPC4420AEVM

I've made a new board referred to DLPC7540EVM Front-End Board, to make it work I need the EDID file for IT6807E, where can I get the EDID file?
Thank you!

4 months ago

0 Fizix 4 months ago

TI__Mastermind 45980 points

Hello AccJet,

I have brought this to the attention of the right person who works with this EVM. They should respond soon.

Fizix

0 Aaron Black 4 months ago in reply to Fizix

TI__Expert 6365 points

Hello,

A question like this arose in the past and can be found here: https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1181933/dlpc7540evm-how-do-i-program-the-eeprom-edid-on-the-front-end-board

Additionally, unfortunately, this DLPC7540EVM wasn't released with an EDID file inside of it for the IT6807 Front-end board - or not one that can be readily found.

Although this is the case, the same front-end card was recently released with the DLPC4420AEVM and it can be found in the software package for this device here: https://www.ti.com/tool/DLPC4420AEVM, there is a guide under the EDID_Programmer_Tool folder.

Best,

Aaron

0 cc jet 4 months ago in reply to Fizix

Prodigy 20 points

Thank you!

0 Fizix 4 months ago in reply to cc jet

TI__Mastermind 45980 points

Hello AccJet,

Please consider accepting the resolution suggested by Aaron. Thank you.

Fizix

DLP®︎ products

DLP products forum

DLPC7540EVM: The DLPC7540EVM Front-End Board's IT6807E EDID