DLPC900: 10bit greyscale pattern display in video pattern mode

永康胡

Part Number: DLPC900
Other Parts Discussed in Thread: DLPC410, DLPC910

Hi Maxine,

If I want to display 10bit greycale pattern with 100Hz frame rate using DLPC900+DLP6500 in the video pattern mode not the Video mode, will it be possible?

Best regards,

Tim

over 1 year ago

+1 Fizix over 1 year ago

TI__Guru 54705 points

Hello Tim,

I will be answering your question as Maxine is in a different group now.

In Video Pattern Mode only 8-bit is available. If you can share the objective, maybe we can find a way to reach the same goal within the constrains of the system.

Fizix

0 永康胡 over 1 year ago in reply to Fizix

Prodigy 60 points

Hi Fizix,

Thank you for your positive response.

I evaluate my system requirements again. I find that the DMD needs to be triggered by the external signal. So I can't use the video pattern mode. I need to transfer to the DLPC910 or DLPC410.

Best regards,

Tim

0 Fizix over 1 year ago in reply to 永康胡

TI__Guru 54705 points

Tim,

Thank you for letting us know.

Fizix

DLP®︎ products

DLP products forum

DLPC900: 10bit greyscale pattern display in video pattern mode