DLPC230-Q1: DLP5530PGUQ1EVM

dubala vaishnavi

Prodigy 70 points

Part Number: DLPC230-Q1

Tool/software:

could you provide the tool which can convert pictures to bin format?

19 days ago

0 Jason Thompson 19 days ago

TI__Intellectual 2325 points

Not sure if this related to the other thread. One starting point for using the tools is here. https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1077842/faq-dlpc230-q1-dlp-auto-hud-gen-2-resources-and-documentation

0 dubala vaishnavi 19 days ago in reply to Jason Thompson

Prodigy 70 points

Actually I have the DLP Composer tool ,but to convert the pictures to bin format for splashing images how can i proceed

0 Aishwarya K Aithal 19 days ago in reply to dubala vaishnavi

TI__Intellectual 1495 points

Hello Vaishnavi,

I had also provided you with access to webpage "Headlight Gen 2 - DLPC230 Embedded Software and Configuration Files". Please use the project 1.5.0.0 for DLP5530 PGU. With the DLP Composer tool, you can import the project and build to get a firmware binary image. You can also add custom images to the project and create a firmware binary file. To program the binary onto the flash, you must use the DLP Control Program.

You can find detailed instructions in Section 1 of FAQ - https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1077842/faq-dlpc230-q1-dlp-auto-hud-gen-2-resources-and-documentation#Heading_level_1_entry_1

I will close the other ticket that you have created for the same topic, but keep this open in case you have further questions.

Thank you,

With Regards,
Aishwarya

0 dubala vaishnavi 19 days ago in reply to Aishwarya K Aithal

Prodigy 70 points

Hi Aishwarya

Could you please tell which option is available to add custom images to the project and create binary file in dlp composer tool after importing the project.

Thanks,

With Regards,

Vaishnavi

0 Aishwarya K Aithal 19 days ago in reply to dubala vaishnavi

TI__Intellectual 1495 points

Vaishnavi,

You can add images in the 'Splash' page in the DLP Composer project. I believe the reference project already has two splash images. I would suggest you build the reference project as is and display the splash image, before adding your custom images.

Please refer to the Help Guide embedded in the DLP Composer tool for information on each feature.

Thank you,

With regards,
Aishwarya

0 dubala vaishnavi 18 days ago in reply to Aishwarya K Aithal

Prodigy 70 points

Thank you Aishwarya

If there is any further assistance needed ,I will text you

Vaishnavi

0 Aishwarya K Aithal 18 days ago in reply to dubala vaishnavi

TI__Intellectual 1495 points

Vaishnavi,

Since the original question has been resolved, I have split the thread. Closing this ticket now.

Thank you,

With Regards,
Aishwarya

DLP®︎ products

DLP products forum

DLPC230-Q1: DLP5530PGUQ1EVM