DLP4500NIR: DLP Spectrometer use as a pyrometer

shakti singh

Part Number: DLP4500NIR

Tool/software:

I am eager to know about using DLP spectrometer as a pyrometer solution for temperature monitoring of Metal surface in Heavy Engineering.

2 months ago

0 Fizix 2 months ago

TI__Mastermind 46950 points

Hello Shakti,

It sounds like you are wanting to use the DLP4500NIR dmd or the NIRScan-nano. Please help me understand a little more about the requirements you have. Such as what wavelengths. For example 0.8 to 14 μm?

If you are uncomfortable sharing this in the public forum please send me a friend invite.

Fizix

0 shakti singh 2 months ago

Prodigy 10 points

I am looking for wavelength between 0.5 to 3 micron

0 shakti singh 2 months ago in reply to Fizix

Prodigy 10 points

Wavelength range below 3 micron . As I want to monitor temperature range from 100 to 400 degree centigrade in welding process of metal surface

0 Fizix 2 months ago in reply to shakti singh

TI__Mastermind 46950 points

Hello again Shakti,

It sounds like the NIR nano would likely be better for you. You can start on this page: https://www.ti.com/tool/DLPNIRNANOEVM#order-start-development

Fizix

DLP®︎ products

DLP products forum

DLP4500NIR: DLP Spectrometer use as a pyrometer