• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 580 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ALP-4.1 Connector

mori vatan
Prodigy 10 points
Other Parts Discussed in Thread: ALP

Hi,

Currently I am using ALP 4.1, Unfortunately, the USB port on board was broken, and I want to use another Multi-Purpose I/O, but I don`t know how to use this port to control the DMD with Labview.

I read the ALP-4.1 Connections Doc but I can understand how to control the DMD with this port

I really appreciate I any one could guide me.

Thanks

Mori

  • 0
    TI__Guru 54320 points

    Hello Mori,

    Welcome to the DLP section of the TI-E2E Community.

    TI does not make the ALP 4.1.  Although the board is a TI evaluation board, the APPS_FPGA code is proprietary and is written by ViALUX. 

    You will need to contact the distributor that you purchased the board from to resolve your issue.  I believe that you will need to get the USB port repaired in order to interact with the ALP 4.1 but please verify this with your distributor.

    Sincerely,

    Fizix