About DLPC200 firmware

xiaochun diao

Intellectual 405 points

Other Parts Discussed in Thread: DLP5500

according to the datasheet of dlpc200 ,

i should download a dlpc200 firmware to make the whole system work,

the file of firmware can be downloaded from ti website , called " xxxxxx . BIN "

but i don't konw how to download it into the borad. (using the controlling software or something? )

thanks~~

over 13 years ago

0 Sanjeev over 13 years ago

TI__Mastermind 30875 points

Hi Xiaochun,

Have you purchased DLP LightCommander(TM) Kit? Then you can download the kit control software from here http://www.logicpd.com/products/system-on-modules/dlp-lightcommander-development-kit/

Once you download and install software on the PC the Kit user guide describes procedure of updating the DLPC200 firmware.

We suggest you to start with DLP LightCommander(TM) Kit for evaluation and prototype purpose, the kit provide documentation on schematics and other hardware interface specifications. After this you can try building your own board by ordering DLP5500 chipset.

Regards,

Sanjeev

DLP®︎ products

DLP products forum

About DLPC200 firmware