LCr + Labview

Rong Sun

Prodigy 160 points

anyone is attempting TCP communcation via Labview? Please post some sample codes for guidance. Thank you!

over 13 years ago

0 Divya Reddy over 13 years ago

TI__Expert 4500 points

Hi Rong,

Sorry, we have not attempted controlling the LightCrafter via Lab View. Could you please provide details of your application, so we can better enable you.

Regards,

Divya

0 Rong Sun over 13 years ago in reply to Divya Reddy

Prodigy 160 points

Divya said:

Hi Rong,

Sorry, we have not attempted controlling the LightCrafter via Lab View. Could you please provide details of your application, so we can better enable you.

Regards,

Divya

Hi Divya,

At this moment, I just want to communicate to LCr via Labview's stock TCP sub-vi's. I am not spending too much tim on that due to time constraints. If you could provide an example of that would be great. Thanks in advance.

Rong

0 Divya Reddy over 13 years ago in reply to Rong Sun

TI__Expert 4500 points

Hi Rong,

Unfortunately the Lab View code is not available at this time. You might have already checked it. If not, the sample code to control the LightCrafter can be downloaded at,

http://software-dl-1.ti.com/dsps/forms/self_cert_export.html?prod_no=DLPLIGHTCRAFTER_API_2012_06_21.zip&ref_url=http://software-dl-1.ti.com/analog/analog_public_sw/dlp/

Further details are available on the E2E post.

Regards,

Divya

DLP®︎ products

DLP products forum

LCr + Labview