Controlling frame rate with API

xiaochun diao

Other Parts Discussed in Thread: DLPC200

Hi~

we are trying to control the lightcommander with the API function .

1, how to control the frame rate of the DMD in the lightcommander with the API function ? (by which function?)

2, if we verified the frame rate , the LED illumination time wil changed automatically or should we handle it by ourself ?

thank you ~~

-diao

over 12 years ago

0 Sanjeev over 12 years ago

TI__Mastermind 30875 points

Hi Diao,

1. For a giving frame-rate there requires a complex DLPC200 HW LUT table calculation, that is not possible to compute on the fly. Therefore it requires building configuration data via DLP LC GUI control software. There is a discussion on E2E forum, please refer to it for more info http://e2e.ti.com/support/dlp__mems_micro-electro-mechanical_systems/f/387/t/187661.aspx

2. Yes, once you run a configuration for specific frame rate the DLPC200 takes care timing LED Illumination. So you don't need to handle timing of LEDs.

Regards,

Sanjeev

0 xiaochun diao over 12 years ago in reply to Sanjeev

Intellectual 405 points

thank you ~

DLP®︎ products

DLP products forum

Controlling frame rate with API