• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 28 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LightCrafter4500 GUI Version 1.1 does not deal with the solution.(?)

Rossinag
Expert 1705 points
Other Parts Discussed in Thread: DLPLCR4500EVM

Dear All,

If I am correct, the current downloadable version GUI (Version 1.1) does not deal with the "solution".

For our convenience, I'd like to save or reload the settings as the "solution". Can we get the such software soon?

 

Best regards,

Rossinag

  • 0
    TI__Expert 6995 points

    Rossinag,

    You are correct. Version 1.1 of the LightCrafter 4500 GUI does not store settings. Version 1.2 of the GUI is currently in final  testing and will be released soon. Version 1.2 supports saving the current GUI settings into a file on the PC. This file can be read and loaded into the LightCrafter 4500 through the GUI. The fie with the settings can also be written into the firmware, so the LightCrafter 4500 can boot with those settings active.

    Best regards,

      Pedro

  • 0 in reply to PedroGelabert
    TI__Expert 6995 points

    Version 1.2 of the GUI has been uploaded to the DLP LightCrafter 4500 page. You can find it here:

    http://www.ti.com/tool/dlplcr4500evm

    The new version has the following features:

    • supports creating and saving solutions
    • reorganization of the some of the GUI sections for easier use
    • additional resources tab with links to documentation, E2E, download pages
    • a fix to improve HDMI image quality
  • 0 in reply to PedroGelabert
    Expert 1705 points

    Dear Pedro,

    Thank you for your help.

    I got the new GUI software and tried.   This is very helpful for me!

    Thank you and best regards,

    Rossinag