Does DLP LightCrafter with 0.3WVGA chip can be a 3D scanner just like DLP LightCrafter 4500？

Hello Chancen,

The DLP LightCrafter can absolutely be implemented in a 3D scanner! Both the LightCrafter and LightCrafter 4500 have important features that make them well suited for 3D scanning: accurate pixel mapping without dithering, fast pattern rates, and triggering to synchronize with cameras. 

Were you interested in using the LightCrafter with our 3D Machine Vision Reference Design, TIDA-00254, instead of the LightCrafter 4500? Currently the reference design only supports the LightCrafter 4500 platform, but the software could be expanded to work with the LightCrafter if you're comfortable modifying the source code.

Best regards,

Blair

Hi Blair,

           Thanks for your reply! That's a good news. However  if I want to use lightcrafter, where can I get the source code of the software. I can only find a windows installer.

Hello Chancen,

The source code is contained inside the installer. 

Best regards,

Blair

Hello Blair,

        Thanks for your kindly reply!!!

        I have found source code, and how I can modify the source code? Is there a document about modify the source to fix the lightcrafter? 

Hello Chancen,

Which source code are you referring to? The LightCrafter GUI or the 3D Machine Vision reference design?

Best regards,

Blair