DLP Discovery 4100 .55 XGA setup

Davis Wu

Hi, I just purchased a DLP Discovery 4100 Starter Kit that came with a .55'' XGA Type X DMD. Are there any resources on how to operate or setup the kit (e.g. software setup) like the user guide for the DLP Lightcrafter? I haven't been able to find anything so far, and the DLP4100 "User Guide" on the DLP page is literally only one page long. Thanks.

over 10 years ago

0 Trevor Dowd over 10 years ago

TI__Expert 6370 points

Hi Davis,

Do you mean that you have a Light Commander with the 0.55" XGA DMD, or do you have the DLP Discovery 4100 with a 0.7" XGA DMD?

Let me know what you have and I'll try and point you toward documentation.

Best regards,
Trevor

0 Davis Wu over 10 years ago in reply to Trevor Dowd

Prodigy 20 points

Hi, sorry for the late reply. I believe I have neither of those, since I received a product titled "Discovery 4100 Starter Kit .55 Type X VIS DMD".

0 Trevor Dowd over 10 years ago in reply to Davis Wu

TI__Expert 6370 points

Hi Davis,

That product is no longer sold by TI (for quite a while now). Did you just purchase it, or have you had it for a few years?
For support on this particular product, you will have to reach out to your supplier. Let me know if you have difficulty receiving help from them.

Best regards,
Trevor

DLP®︎ products

DLP products forum

DLP Discovery 4100 .55 XGA setup