lightcrafter GUI 2.0

nathan klein

Intellectual 345 points

Other Parts Discussed in Thread: DLPC900REF-SW

Where can I download GUI version 2.0 ?

there is no download option at

Thanks,

Nathan Klein

over 10 years ago

0 Trevor Dowd over 10 years ago

TI__Expert 6370 points

Hi Nathan,

The GUI can be downloaded from both the LightCrafter 6500 and 9000 EVM pages. On the LightCrafter 6500 EVM page, it can be found in the table in the "Available Versions" section, in the line: DLP LightCrafter 6500 Firmware and Software Bundle version 2.0.

Sorry for the confusion with the page you mentioned, I will sort out that link.

Best regards,

Trevor

0 nathan klein over 10 years ago in reply to Trevor Dowd

Intellectual 345 points

Hi Trevor,
When clicking on the "windows" in that table it takes me to :

www.ti.com/.../dlpc900ref-sw

and there is no download link there.
Thanks,
Nathan Klein.

0 Trevor Dowd over 10 years ago in reply to nathan klein

TI__Expert 6370 points

Hi Nathan,

Yes, I see the problem now. While I work with our web team to get the links fixed, try using the SW download link on this post.

Best regards,

Trevor

0 Rossinag over 10 years ago in reply to Trevor Dowd

Expert 1705 points

Hello Trevor
It looks like same problem is happening to me now.
I cannot download the SW at the download link now.
Would you please check again?
Best regards,
Rossinag

0 Trevor Dowd over 10 years ago in reply to Rossinag

TI__Expert 6370 points

Hello Rossinag-san,

Thank you for pointing this out, I believe the website reverted back to an earlier version after an update. We will get the link added as soon as possible. In the meantime, the download links can be found in one of my posts on this page.

Thanks,

Trevor

0 Rossinag over 10 years ago in reply to Trevor Dowd

Expert 1705 points

Hello Trevor-san,

Thank you for your support!
I could get the software from your link.
Thank you and best regards,

Rossinag,

0 Trevor Dowd over 10 years ago in reply to Rossinag

TI__Expert 6370 points

I just wanted to close out this thread and say that the download has been properly updated at the page linked above.

Thanks for pointing this out to us!

Best regards,
Trevor

DLP®︎ products

DLP products forum

lightcrafter GUI 2.0