DLP LightCrafter 4500 Displays A Series Of Fringe Images That I Designed In Sequence Mode

user4438193

In the Pattern Sequence Mode , LightCrafter 4500 can only displays some of the red , green , yellow ....and green images.If I want that DLP LightCrafter 4500 Displays A Series Of Fringe Images That I Designed In Sequence Mode.What should I do?

over 9 years ago

0 Clinton Rodgers over 9 years ago

TI__Genius 13235 points

Hi,

Thanks for posting. What do you mean by fringe images? What are the bit depth of these patterns? How many are you trying to display?

Thanks,
Clinton

0 Sanjeev over 9 years ago

TI__Mastermind 30875 points

For monochrome images you can just select white color.

0 user4438193 over 9 years ago in reply to Clinton Rodgers

Prodigy 40 points

This is a picture of a lot of black and white sine waves.That is 24-bit.I would like to display 12 picture.

0 user4438193 over 9 years ago in reply to Clinton Rodgers

Prodigy 40 points

DLP LightCrafter 4500 applied to the Three-dimensional Shape Measurement.

0 user4438193 over 9 years ago in reply to Clinton Rodgers

Prodigy 40 points

Hi，Clinton.The DPL needs to project a picture of the 24 bits of BMP designed by MATLAB to the object, and then send an external trigger letter to the industrial camera, the industrial camera to get the pattern on the object. This process should be repeated 12 times. How can I load the 24 bit pattern through the MATLAB design into the picture sequence, but only through the LightCrafter4500_v1.2.exe setting.Do I need to modify the source code？

DLP®︎ products

DLP products forum

DLP LightCrafter 4500 Displays A Series Of Fringe Images That I Designed In Sequence Mode