LightCrafter Display 4710’s software code cannot be unzipped .

Rossinag

Expert 1705 points

Other Parts Discussed in Thread: DLPC3439

Dear All,

I'm trying to use following software in the www.ti.com/.../dlpdlcr4710evm

1) DLPC3439 Dual ASIC ARM Embedded Software

2) MSP430 HDMI Sample Code

But the both zip files could not be extracted.

Would you please check this?

Best regards,

Rossinag

over 10 years ago

0 Nadine Estermann over 10 years ago

TI__Genius 10505 points

Hello Rossinag,

I am sorry to hear that you are having problems downloading our software.

We will try to resolve this issue and get back to you as soon as possible.

Thank you,

Nadine

0 Nadine Estermann over 10 years ago in reply to Nadine Estermann

TI__Genius 10505 points

Hello Rossinag,

We solved the issue and you should be able to download the MSP430 sample code now.

Please let me know if you have any further issues.

Best regards,

Nadine

0 Rossinag over 10 years ago in reply to Nadine Estermann

Expert 1705 points

Hello Nadine,

I confirmed that the "MSP430 HDMI Sample Code" can be extracted. Also I realized the "MSP430 HDMI Sample Code" downloader includes both DLPC3439 firmware bin file and MSP430 sample zip file. Is this correct understanding? If so, we will use these file. Thank you.

(But it looks like the downloader of "DLP3439 Dual ASIC ARM Embedded Software" is the same to above. But its MSP430 sample zip file is still problem. This might not be problem for us but I would like to let you know. )

Best regards,

Rossinag

0 Nadine Estermann over 10 years ago in reply to Rossinag

TI__Genius 10505 points

Hello Rossinag,

Thank you. We will update that too.

Best regards,

Nadine

DLP®︎ products

DLP products forum

LightCrafter Display 4710’s software code cannot be unzipped .