• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 434 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

trigger pattern start stop via usb

johannes larsch
Prodigy 40 points

Hi,

I was wondering if it was possible to start/stop the display of a pattern on a USB connected lightcrafter via a software trigger. A software trigger could be a 'registered message' or the windows scheduler?

best,

johannes

  • 0
    TI__Mastermind 30875 points
    Hello Johannes,

    Do you mean single step display of patterns? That is define a configuration say for 'N' # of patterns, then issue a software command to start displaying the pattern; advance to next pattern on software command. If so, then this option is not available on this chipset; there is a workaround for it; you have to every time define a pattern LUT with just one entry and use start/stop option to display the pattern; again update one entry LUT with next pattern to be displayed, use start/stop to show the next pattern. Repeat the process for displaying all the patterns.

    Regards,
    Sanjeev