• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 28 subscribers
  • Views 926 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Upload Image to LightCrafter 4500 without using GUI

Nijin Thykkathu
Prodigy 30 points
Other Parts Discussed in Thread: DLPC350

Hi all,

I was hoping if there is a way I could upload images to the DLP without using the GUI such as command line APIs.

It would be great if anyone could help me with this

Regards

Nijin Thykkathu

  • 0
    TI__Genius 13235 points
    Hi Nijin,

    It sounds like you are using the LightCrafter4500 in pattern sequence mode, displaying patterns from flash images. Have you gone through the process of bundling your pattern images with the DLPC350 firmware and upload this with the GUI? Could you describe your reason for needing a GUI-less interface?

    You could take a look at the code behind the image bundling, FW building and FW upload pieces of the LightCrafter4500 GUI to get familiar with the details. We also provide a DLPC350 programmer's guide, which would be useful for your understandling (www.ti.com/.../dlpu010).

    Thanks,
    Clinton
  • 0 in reply to Clinton Rodgers
    Prodigy 30 points

    Hi,

    My main aim is to upload images to DLP from visual studio project. I am not sure how to go about doing this. If you think it is possible could you please help me with it.

    Regards

    Nijin Thykkathu