• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 816 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Change the refresh rate of the video mode of the DLP LightCrafter 4500 to 200 Hz?

Ying Zhu
Prodigy 60 points

In the user manual the video mode refresh rate is up to 120 Hz. I want to use single color (green) with high refresh rate. Is it possible to increase the refresh rate to 200Hz? If using PandaBoard, will it increase the refresh rate?

  • 0
    TI__Genius 13235 points
    Hi,

    If you take a look at "Table 4-1. Allowable Pattern Combinations", you can see what pattern bit-depth combinations you can run at the various rate for video mode. If your patterns/images can be 7-bit or less, you can achieve the 200Hz+ rate. You can use our standard GUI to test this out.

    Thanks,
    Clinton